The effect of the filling ratio on the operating characteristics of an indirect drum dryer

Jan Havlík, Tomáš Dlouhý, Michel Sabatini

The effect of the filling ratio on the operating characteristics of an indirect drum dryer

Číslo: 1/2020
Periodikum: Acta Polytechnica
DOI: 10.14311/AP.2020.60.0049

Klíčová slova: Indirect drying, biomass, energy consumption, evaporation capacity, drying curve.

Pro získání musíte mít účet v Citace PRO.

Přečíst po přihlášení

Anotace: This article investigates the effect of the filling ratio of the indirect rotary dryers on their operating characteristics. For moist biomass drying before combustion, the use of indirect drum dryers heated by a low pressure steam has proven to be highly suitable. Regarding the design of new dryers, it is necessary to experimentally verify the operating characteristics for specific materials and drying conditions. For this purpose, a set of experiments on a steam heated rotary drum dryer were carried out with green wood chips containing 60 to 66 wt% of moisture. The following operational characteristics of the dryer were experimentally determined: drying curves describing the process, square and volumetric evaporation capacities and drying heat consumptions. Based on the experimental results, the effect of various drum filling by dried material on the mentioned operating characteristics was analysed. On the one hand, higher drum filling ratio increases the drying time, on the other hand, the evaporation capacity also increases, while the specific energy consumption does not significantly alter. The maximum value of the evaporation capacity was reached when the drum was filled to 20 wt%. When the filling ratio was increased to 25 wt%, the evaporation capacity experienced almost no change.