Examination of the usability of basalt aggregate in sifcon

Metin İpek

Examination of the usability of basalt aggregate in sifcon

Číslo: 4/2018
Periodikum: Civil Engineering Journal
DOI: 10.14311/CEJ.2018.04.0040

Klíčová slova: SIFCON, fiber, quartz, basalt

Pro získání musíte mít účet v Citace PRO.

Přečíst po přihlášení

Anotace: In this study, the usability of the quartz and basalt rocks as aggregate in Slurry Infiltrated Fiber Concrete (SIFCON) has been examined. In the study, quartz aggregate has been taken as reference and basalt aggregate has been used as a substitute and separately. The aggregates have been ground and classified in the dimensions of 0-0.1 mm (powder) and 0.1-0.6 mm (sand). The physical properties of the aggregates have been determined and SIFCON slurry has been prepared. The samples produced by this slurry have been conducted to Compressive Strength, Flexural Tensile Strength, Fracture Toughness, Ultrasonic Pulse Velocity, Schmidt Hammer tests. Moreover, unit cost has been examined with the different aggregate usages. Consequently; the highest compressive and flexural strength being respectively 99.75 MPa and 32.01 MPa have been reached with the use of quartz aggregate. The compressive strength of the basalt aggregate is 14% lower than that of the quartz aggregate where, its flexural strength almost remained in the same value. It has been observed that basalt aggregate is more economical in terms of unit strength cost. It is suggested that basalt aggregate could also be used in SIFCON as an alternative to the quartz aggregate.